PROCEDURE
F.I.P. DISPLAY
Turn on the Service Mode
1.Press the FF key and the
EJECT key simultaneously for
more than 3 seconds.
Activate the Service Mode 2
2.While keep placing FF key,
press the EJECT key in twice.
Activate the Entering Mode.
3.Press the EJECT key for more
than 3 seconds.
Set the Mode 2.
4.Press the CH UP key in twice.
Display the Setting Code.
5.Press the POWER key to turn
the power on.
(Colon starts
flashing)
Enter the Model and Option Code.
6.Service Screen is displayed on the monitor.
7.Set the applicable Model and Option code by
using REW, PLAY, STOP and FF keys on theRemote
Controller. (See Fig.S1 & S2)
Exit from Service Mode.
8.Press the POWER key to turn
the power off.
9. Press FF and EJECT keys
simultaneously in 6 times.
(Normal
Indication)
Fig.S1 Service Screen (sample)
3
Summary of Contents for NV-SV120EF
