- 2 -
Connections (without Scart cable)
1
2
3
4
1
4
4
3
2
4
To AC Mains socket
RF cable (supplied)
Must be connected to
watch TV channels.
TV
RF cable
Aerial
Aerial Input socket
Satellite Receiver
Aerial Output socket
RF Input socket
RF Output socket
AC Mains lead
AC Input socket
To AC Mains socket
Aerial Input
socket
Satellite Receiver
Satellite Receiver
VCR
VCR
TV
IN/
ENT
OUT/
SORTIE
DEO
RF/
ANT
IN/
ENT
OUT/
SORTIE
RF/
ANT
Connect the aerial to the aerial input socket of the Satellite
Receiver.
- If you do not have a Satellite Receiver, connect the
aerial to the RF input socket of the VCR and go to step .
3
Connect the aerial from the Satellite Receiver to the RF input
socket.
Connect the
to the TV aerial socket.
Aerial Output socket
Plug the TV, VCR and Satellite Receiver into the mains
as shown at the top of the page.
You can connect your VCR to a TV and Satellite Receiver using RF cable.
However, using this connection method it may be difficult to obtain a clear picture from the Satellite Receiver.
For this reason it is not recommended for inexperienced users.
(See preferred connection on page 3.)
VCR
Notes:
Switch ON your Satellite Receiver; to ensure reliable tuning select either SKY ONE or SKY NEWS.
If, after Auto Setup is complete, the programme position of the satellite receiver is not to your
preference, or 'SAT' name is not shown in the Programme List, you can re-arrange the
programme position and enter 'SAT' name manually. See page 40-42 of Operating Instruction.
(supplied)
All manuals and user guides at all-guides.com
