background image

8

4

Tape Mode/Rec Mode indicator (SP/LP/EP)

5

Cassette-in indicator

6

Colour system indicator

Any selected colour TV system except [AUTO] appears on 
screen display. See the “

To Set the Colour TV System”

  

(page 7).

7

NAVI CHECK indicator

During playback, press the [STATUS/ NAVI CHECK] 

(32)

 

repeatedly until the NAVI CHECK indicator appears. You 
can check the property of the programme being played. 
However, this function is effective only for programmes 
recorded with setting the [JET NAVIGATOR] to [ON]. (See 
to the right.)

Clock 

#

 Counter 

#

 Remaining Tape Time 

#

 

NAVI CHECK indicator 

Clock

• The VCR is checking the programme information while 

the message [CHECKING DATA] is displayed.

• When the message [DATA NOT FOUND] appears, the 

NAVI CHECK indicator cannot be displayed.

Note:

• The On Screen Display may be disturbed or disappeared 

during special playback.

Option Setting

1 Press [MENU] 

(9)

 to display the Main menu on the TV 

screen.

2 Press [

43

(28)

 to select [OPTION] then press 

[ENTER] 

(26)

.

3 Press [

43

(28)

 to select the desired field.

TAPE SELECT:

To select the corresponding video 
cassette tape length to display the 
approximate remaining tape time.

• Press  [

2 1

(28)

 to select the corresponding video 

cassette tape length.

AUTO:The VCR automatically distinguishes E30, -60, 

-90, -120, -180 and -240 tapes.

E195:

For E195 tape

E260:

For E260 tape

E300:

For E300 tape

• The remaining tape time may not be displayed correctly 

depending on the tape used.

NTSC INPUT SELECT: To select the colour TV system 

used to record NTSC signals. 

• Press  [

2 1

(28)

 to select [AUTO]. Allows NTSC [4.43] 

or [3.58] signals to be distinguished automatically.

• If the tape has not recorded correctly, select 4.43 or 3.58.

4.43:

When recording NTSC 4.43 signals.

3.58:

When recording NTSC 3.58 signals.

• Some programmes on NTSC 3.58 system cannot be 

recorded correctly by selecting [3.58].

NTSC PB SELECT:

To select the colour TV system of 
the TV used to play back a tape 
recording NTSC signals.

• Press  [

2 1

(28)

 to select the desired position according 

to the colour TV system of the TV.

on PAL TV:

For TVs that can receive PAL signals.

4.43:

For TVs that can receive NTSC 4.43 signals.

3.58:

For TVs that can receive NTSC 3.58 signals.

JET NAVIGATOR:

To set the conditions for the Jet 
Navigator Function.

• Press  [

2 1

(28)

 to select [ON] or [OFF].

OFF:

Initially set at this position.

ON:

Jet Navigator function works. If you select [ON], 
[OSD REC] is set to [OFF] automatically.

DELETE NAVIDATA:

To delete all the Jet Navigator data 
stored in the VCR memory.

• Press  [

2 1

(28)

 to select [ENTER] then press [ENTER] 

(26)

 to do the deletion.

NO:

Initially set at this position.

ENTER: It is done to delete all the Jet Navigator data.

     MENU

SELECT
END

:       , ENTER
: MENU

CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 

0PROG.

END : MENU

TAPE SELECT 

[AUTO]

NTSC INPUT SELECT 

[AUTO]

NTSC PB SELECT 

[onPALTV]

JET NAVIGATOR 

[OFF]

DELETE NAVIDATA 

[NO]

OSD REC 

[OFF]

OSD [AUTO]
 

SELECT : 

OPTION

NV-MV41GN.book  8 ページ  2004年3月1日 月曜日 午後7時12分

Summary of Contents for NV-MV41GN





















Reviews: