Panasonic NV-MV22GC Operating Instructions Manual Download

Page: 14 / 18

LSQT0880

Search Functions

Jet Navigator

This VCR can display a list of the recorded programmes on
the inserted video cassette on the TV screen. You can then
select the desired programme, and the VCR will quickly locate
its beginning and start playback.

Conditions for correct operation of the Jet Navigator
function:

• The tape length of the inserted cassette must be set

correctly. (See page 8.)

• The VCR must not be in the timer recording standby mode.
• A programme at least 15 minutes must be recorded on the

tape.

Preparations

• Display the VCR picture on the TV.
• Be sure to set [JET NAVIGATOR] to [ON] (see page 8) and

perform recording.

Operations
1 Press [NAVI]

(25)

to display the

Jet Navigator list.

• Up to 14 programme data that have

been recorded are displayed on the
Jet Navigator list.
(7 programme data for each page)

• When more than 14 programs have

been recorded in one cassette, the programme data are
deleted from the first one.

• When pressing [NAVI]

(25)

during playback, playback

stops and the Jet Navigator list appears.

2 Press [NAVI]

(25)

several times to select the

programme that you want to locate and play back.
After more than 3 seconds, the VCR starts to search
for the beginning of the selected programme and
playback starts automatically.

• Every time you press [NAVI]

(25)

, the cursor shifts

above.

To Cancel the Jet Navigator list:

Press [MENU]

(9)

To Set the Category

The category setting allows you to find
what kind of programmes are recorded
by the character and the icon
indications.

1 Press [

]

(28)

while the Jet

Navigator list appears. Then, select
the desired category by pressing [

432 1

]

(28)

2 Press [MENU]

(9)

To Delete the Jet Navigator Data of a Single
Video Cassette Tape

Keep [CANCEL]

(5)

pressed for more than 5 seconds while

the Jet Navigator list appears.
[

] appears on the list.

See page 8 to delete all the Jet Navigator data stored in the
VCR memory.

Notes:

• The Jet Navigator list is stored in each cassette. Up to 20

cassettes and 50 programmes can be registered.

• Signals approximately 10 seconds before and after the

current tape position are checked. (During this checking,
[CHECKING JET NAVIGATOR DATA.] is displayed on the
TV screen.)

• Checking cannot be performed properly where there are no

signals such as at unrecorded portions of the tape. In this
case, press [NAVI]

(25)

at a portion of the tape where a

programme has been recorded of this VCR. This will allow
signal checking to be performed more reliably. When a
signal is still not found, [CAN NOT FIND JET NAVIGATOR
DATA.] is displayed on the TV and you cannot find the
beginning of the programme.

• [PROGRAMME IS COMPLETE. REMAINING

PROGRAMME 0. DELETE JET NAVIGATOR DATA.]
appears when you try to store more than 50 programmes.
The new item is added and the oldest item is deleted.

• When programmes equivalent to 20 cassettes are already

stored in memory, [REMAINING CASSETTE 0. FOR JET
NAVIGATOR.] is displayed after Jet Navigator data checking
is performed. Programmes recorded without deleting data
are not registered in the list.

• The list does not appear when playing tapes recorded on

other equipment.

• When recording over the same location on a tape, it may not

work correctly.

END : MENU

SELECT : NAVI,

NO.01 JET

NAVIGATOR

DATE CH ON CATEGORY

10/18    1 10:30  MUSIC
10/19   24 15:00  SPORT
10/21    5 22:15
10/23   AV 20:02
10/26    4 19:10  EDUCA
10/27    2 20:02
10/27   12 20:30

END : MENU

SELECT : NAVI,