External recording control
EXT LINK
!
Press the
button to activate the VCR's recording stand-by mode.
As long as the Video- or Controlsignal is being transmitted by the Satellite or
Digital Receiver, the VCR will record.
EXT LINK
The following screen will be shown
if you selected EXT LINK 2:
- Be sure that the timer programmes stored by your VCR do not overlap the
ones of the satellite or digital receiver.
- Some external equipment may not work with this function, refer to the
operating instructions for the external unit.
!
!
Press
to hide the message.
Press the
button to stop recording.
ENTER
EXT LINK
ENTER : yes
EXT LINK :cancel
EXT LINK recording in progress.
: select
: return
: exit
MENU
EXIT
Tape length
: AUTO(
E-240)
SQPB
: AUTO
OSD
: 4:3
VCR display
: DIMMED
EXT LINK
: 2
Others
25
The AV input of this VCR is equipped for future use with external equipment
having external timer recording control such as digital satellite receivers. The
AV input can be set to EXT LINK 1 or EXT LINK 2 depending on the equipment
to be connected. Fully wired 21-pin scart cable is required. Refer also to the
manufacturer’s instruction for the external unit.
The VCR recording start and stop time is controlled by a control
signal sent via the 21-pin scart cable from the external unit, for
example Sky Digibox.
The VCR will start recording when AV input detects the video
signal and stop recording when the video signal is switched off by
the external unit.
EXT LINK 1:
EXT LINK 2:
Aerial
VCR
Satellite Receiver
TV
External recording control
!
!
!
!
Press
and select Others
Press
Select EXT LINK 2 or 1
Press
to return to the Menu screen.
MENU
ENTER
MENU
Notes:
