manualshive.com logo in svg

Panasonic NV-HS930 Series, Operating Instructions Manual

Share
Download
Panasonic NV-HS930 Series Operating Instructions Manual Download Page 34

34

The Tape Library System Does Not Work Correctly

[The Cassette Number Check has failed.]
• The Cassette Number Check was cancelled midway.

Try to perform the Cassette Number Check again. 
(See page 20.)

• The inserted cassette is new (unrecorded).

The inserted cassette was recorded on another VCR and 
does not have a cassette number.
The inserted cassette was recorded on a model NV-HS930 
VCR other than this unit.
The cassette number of the inserted cassette has been 
deleted from the Tape Library data.
The Library memory may be full.

#

The Cassette Number Check is designed to fail 
whenever one of the above conditions applies; this is 
not a malfunction.

[The recorded programme has not been registered in the 
Tape Library data.]
• The length of the recorded programme is less than 

15 minutes in the SP or LP mode.

• The length of the recorded programme is less than 

25 minutes in the EP mode.
Record for more than 25 minutes in the EP mode.

• No Tape Library data is registered when insert editing is 

performed in a previously recorded programme.
This is not a malfunction.

Summary of Contents for NV-HS930 Series





































Reviews:

No comments

Brands by name

Popular brands

Load more brands