Playback mode
32
LSQT1131
Frame-by-frame playback
≥
Set to Tape Playback Mode.
1
During playback, move the joystick up to
select the [
1
/
;
] icon to pause playback.
2
Push the [
s
VOL
r
] lever.
Towards [T]: normal direction
Towards [W]: reversed direction
≥
If you keep pushing the lever, then the images
will continuously be played back frame by
frame.
≥
The pause icon appears for an instant.
Continuous frame-by-frame playback will start
after the pause icon disappears.
ª
To return to normal playback
Move the joystick up to select the [
1
/
;
] icon to
start playback.
Playback on TV
Images recorded by this camera can be played
back on a TV.
≥
Insert a recorded tape into this camera.
≥
Be sure that the power of the unit is turned off
before connecting it to a TV.
1
Connect the movie camera and a TV.
≥
Connect the movie camera and a TV by using
the AV cable
1
.
≥
If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
2
Turn on this camera and set the mode dial
to the Tape Playback Mode.
3
Select the input channel on the TV.
≥
If the images are not played back correctly on
the TV (e.g. they are displayed vertically),
perform the menu operations in accordance
with the aspect ratio of the TV monitor.
Set [SETUP] >> [TV ASPECT] >> [16:9] or
[4:3].
4
Move the joystick up to select the [
1
/
;
]
icon to start playback.
≥
The image and audio are output on the TV.
5
Move the joystick down to select the [
∫
]
icon to stop playback.
≥
Use the AC adaptor to free you from worrying
about the battery running down.
ª
If the image or audio from this camera
is not output on the TV
≥
Check that the plugs are inserted as far as they
go.
≥
Check the [12bit AUDIO] settings. (
-38-
)
≥
Check the connected terminal.
≥
Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
VOL
A/V
21-pin Adaptor
1
[VIDEO IN]
[AUDIO IN]
LSQT1131_ENG.book 32 ページ ２００７年１月１１日 木曜日 午前９時５分
