Others
65
ª
LCD Monitor/Viewfinder/Lens Hood
LCD Monitor
≥
In a place with drastic temperature changes,
condensation may form on the LCD Monitor.
Wipe it with soft dry cloth.
≥
If your Movie Camera is extremely cold when
you turn its power on, the image on the LCD
Monitor is slightly darker than usual at first.
However, as the internal temperature increases,
it goes back to the normal brightness.
Viewfinder
≥
Do not direct the Viewfinder or Lens to the sun.
Internal components may be seriously
damaged.
≥
To clean the inside of the Viewfinder, keep
pressing
1
and hold the Eyecup
2
and pull it
out.
Lens Hood
≥
When attaching the ND Filter or MC Protector of
the Filter Kit (VW-LF43WE; optional), attach it
on the inside of the Lens Hood without
removing the Lens Hood.
≥
Do not attach other conversion lenses in front of
the Lens Hood; there is no mount to be used for
the attachment.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
200,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
Extremely high precision technology is
employed to produce the Viewfinder screen
featuring a total of approximately 123,000
pixels. The result is more than 99.99%
effective pixels with a mere 0.01% of the
pixels inactive or always lit. However, this is
not a malfunction and does not affect the
recorded picture.
2
1
≥
When you wish to attach the Tele Conversion
Lens (VW-LT4314NE; optional) or Wide
Conversion Lens (VW-LW4307ME; optional),
first of all, turn the Lens Hood counterclockwise
and take it off. Then attach the conversion lens
by turning it clockwise. When you attach the
Lens Hood back, insert
1
into the slot
2
and
turn it clockwise.
≥
If you push the [W/T] Lever toward [W] during
recording with the filter and conversion lens
attached together to the Movie Camera,
4 corners of the image may become dark
(vignetting). For details, please refer to the
operating instructions of your accessories.
≥
Be sure to keep the Lens Hood attached to the
Movie Camera so as to shut out unnecessary
light.
Before Requesting Repair (Problems
and Solutions)
Power
1: The Movie Camera power cannot be turned
on.
• Is the power source connected correctly? (
-8-
)
2: The Movie Camera power is turned off
automatically.
• When the Recording Pause Mode continues
for more than 6 minutes, the power is turned off
automatically for tape protection and power
conservation. (If the AC Adaptor is used, the
power is turned off only when the tape is
inserted in Tape Recording Mode.) When the
tape is inserted in Tape Recording Mode and if
the Recording Pause Mode continues for more
than 6 minutes, the power is turned off
automatically.
To resume recording from this condition, turn
off, then turn on the power again.
3: The Movie Camera power does not stay on
long enough.
• Is the Battery low? Charge the Battery or
attach a fully charged Battery. (
-8-
)
• Has condensation occurred? Wait until the
Condensation Indication disappears. (
-62-
)
Battery
1: Battery runs down quickly.
• Is the Battery fully charged? Charge it with the
AC Adaptor. (
-8-
)
1
2
400GN.book 65 ページ ２００４年６月３日 木曜日 午後１時４９分
Summary of Contents for NV-GS400EB
Page 71: ...71 ...
