Panasonic NV-GS30EN, Operating Instructions Manual

Page: 85 / 96

Others
-85-
Wipe Mode and Mix Mode
If either one of the following operations is carried
out, stored images will be erased, and Wipe and
Mix Functions cannot be used.
≥
Use the Camera Search Function
≥
Press the [STILL] Button
Picture-in-Picture Mode
≥
If the [OFF/ON/MODE] Switch is operated, the
smaller picture disappears.
Multi-Picture Mode
≥
If the [MULTI] Button is pressed while
self-recording Mirror Mode (
-60-
) is used, the still
picture is displayed from the upper right corner
of the screen, but, in reality, the picture is
recorded from the upper left corner as usual.
≥
Multi-Picture Mode cannot be used in digital still
picture mode.
≥
The quality of Multi images deteriorates slightly.
≥
The top and bottom of the Multi pictures will be
cut off slightly.
ª
Playing Back
Repeat Playback
If you continue to press the [
1
] Button for
5 seconds or longer, the Movie Camera switches
to Repeat Playback Mode, and the [R
!
]
Indication appears. (To cancel Repeat Playback
Mode, set the [OFF/ON/MODE] Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use the headphones to listen to the
playback sound, set [AV JACK] on the
[AV IN/OUT SETUP] Sub-Menu to
[OUT/PHONES] and connect the headphones to
the [PHONES] Socket (
-48-
) on the Movie
Camera. In this case, no sound (including a
warning sound and shutter sound) will be
reproduced through the built-in speaker of the
Movie Camera.
Choosing Sound during Playback
You can select the sound by using the
[AUDIO OUT] setting on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and
sub sound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥
If you dub a tape recorded at the [12bit]
selected as the [AUDIO REC] on the
[RECORDING SETUP] Sub-Menu, playback
sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to
[MIX].
ª
Index Search Functions
≥
Index Search may not be possible at the
beginning of tape.
≥
Because Photoshot Index Signals are not
recorded on still pictures recorded in
Continuous Photoshot Mode, the Photoshot
Index Search Function cannot be used for these
still pictures.
≥
Scene Index Search may not function properly if
the interval between 2 scene index signals is
shorter than 1 minute.
ª
Playback Zoom Function
≥
You cannot adjust the sound volume with the
Remote Controller in Playback Zoom Mode.
≥
If you turn off the Movie Camera power or if you
switch from VCR Mode to Camera Mode,
Playback Zoom Mode is automatically
cancelled.
≥
Even if Playback Zoom Functions are being
used, images that are output from the DV
Terminal (
-48-
) or Digital Still Picture Terminal
(
-79-
) are not enlarged.
≥
As you enlarge an image, the quality of image
suffers.
≥
During a Playback Zoom, the Variable Speed
Search Function cannot be changed with the
Remote Controller.
ª
Playback Digital Effect Functions
≥
Signals of images to which digital effects are
added during playback cannot be output from
the DV Terminal (
-48-
) or Digital Still Picture
Terminal (
-79-
).
≥
You cannot use the Wipe or Mix Function while
playing back the non-recorded portion of tape.
Multi-Picture Mode (VCR Mode)
≥
The quality of Multi images deteriorates slightly.
≥
Playback Multi-Mode screens cannot be output
through the DV Terminal (
-48-
) or Digital Still
Picture Terminal (
-79-
).
≥
If there is input from DV Terminal, a multi
screen cannot be created.
≥
If you switch the Movie Camera from the Index
Multi-Picture Mode over to the Camera Mode,
the setting of [SCAN MODE] on the
[MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is
automatically set to [STROBE].
ª
Playing Back on Your TV
≥
If you set [AV JACK] on the
[AV IN/OUT SETUP] Sub-Menu to [IN/OUT],
nothing will be shown on the TV screen except
during playback.
≥
Picture size may be displayed differently when
playing back a Cinema picture on a wide-screen
TV with [B/W] or [SEPIA] of Playback Digital
Effect.
30EN-ENGText.auto.fm 85 ページ ２００９年７月８日 水曜日 午後４時５６分