Panasonic NV-GS280, Operating Instructions Manual

Page: 24 / 140

Record mode
24
VQT0T16
Recording on a tape
≥
Set to Tape Recording Mode.
≥
The lens cover opens automatically.
1
Press the recording start/stop button to
start recording.
2
Press the recording start/stop button again
to pause recording.
≥
For the recording time on a tape, refer to
-10-
.
≥
Carry out a recording check (
-25-
) to verify that
the image is recorded properly.
≥
In order to find the unrecorded section, carry out
the blank search (
-25-
).
≥
If you want to preserve the original sound
recorded when audio dubbing (
-47-
), set
[ADVANCED] >> [AUDIO REC] >> [12bit] to
take pictures.
ª
On-screen display in the tape
recording mode
¢
These are only displayed when you press the
[PHOTO SHOT] button half way while a card is
inserted.
These are not displayed when using the remote
control.
1) Recording time elapse
2) Remaining tape indication
3) Still picture size
4) Card indication (
-53-
)
5) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
6) Quality of still pictures
ª
Concerning the remaining tape time
indication on the screen
≥
The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥
During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥
In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
PC
;
R 0:30
0h00m10s00f
100 100
1)
2)
3)
¢
5)
¢
6)
¢
0.2
4)
¢
VQT0T16_EP_eng.book 24 ページ ２００５年１１月２１日 月曜日 午後１０時２３分