Panasonic NV-GS24EG, Service Manual

Page: 76 / 110

13. Installation of LCD Backlight P.C.B., LCD Panel Ass'y,
LCD Shield Case Unit and LCD Case B
Use extreme care regarding LEDs when handling the LCD
Backlight P.C.B.
Install in order shown below.
1) Install the LCD Panel Ass'y onto the LCD Shield Case
Unit with the 7 Locking Tabs (L-4) while carefully
bending the LCD F.P.C. at its base so as not to damage
it.
2) Install the LCD Shield Case into the LCD Case B with
the 4 Locking Tabs (L-3).
3) Install the LCD Backlight P.C.B. onto the LCD Panel
Ass'y with the Locking Tab (L-2).
4) Tighten the Screw (533) while keeping the LCD
Backlight P.C.B. pressed toward the right. Then, connect
the F.P.C. to Connector FP8102.
boss
boss
LCD
Shield
Case
Unit
LCD Panel Ass'y
LCD
F.P.C.
LCD Backlight P.C.B.
LCD Case B
(L-3)
(L-3)
(L-3)
(L-4)
(L-4)
(L-4)
(L-4)
(L-4)
(L-3)
(L-2)
FP8102
LEDs
Press 533
Bend
(L-4)
(L-4)
Fig. D14a