background image

23

To Set the Category

The category setting allows you to find what kind of
programmes are recorded by the character and the icon
indications.

Press the Cursor button (

1

S

 while

the Jet Navigator list appears.

Category

Indication

Icon

MOVIE

MOVIE

MUSIC

MUSIC

DRAMA

DRAMA

EDUCATION

EDUCA

DOCUMENTARY

DOCUM

SPORTS

SPORT

CHILDREN

CHILD

NEWS

NEWS

OTHERS

OTHER

To Delete the Jet Navigator Data of a Single Video
Cassette Tape:

Keep the CANCEL button 

;

 pressed for more than

5 seconds while the Jet Navigator list appears.
[– –] appears on the list.
– See page 13 on the way to delete all the Jet Navigator data

stored in the VCR’s memory.

Notes:

– The Jet Navigator list is stored in each cassette.
– Signals approximately 10 seconds before and after the

current tape position are checked. (During this checking,
[CHECKING JET NAVIGATOR DATA.] is displayed on the
TV screen.)

– Checking cannot be performed properly when signals are

attempted to be checked at portions of the tape where
there are no signals such as at unrecorded portions of the
tape. In this case, press the NAVI button 

4

 at a portion of

the tape where a programme has been recorded of this
VCR. This will allow signal checking to be performed more
reliably. When a signal can still not be found, [CAN NOT
FIND JET NAVIGATOR DATA.] is displayed on the TV and
you cannot find the beginning of the programme.

– Up to 20 cassettes and 50 programmes can be registered.
– If 50 recorded programmes data is already stored in

memory and you attempt to store timer recording data for
another programme, the message [REMAINING
PROGRAMME  0. DELETE JET NAVIGATOR DATA.]
appears. If you attempt to make a new recording, this same
message also appears after you insert the cassette and the
Jet Navigator data is checked. As each timer recording or
manual recording is finished, the programme data is
deleted, starting from the oldest data.

– When a new programme is attempted to be recorded if

programmes equivalent to 20 cassettes are already stored
in memory, [REMAINING CASSETTE  0. FOR JET
NAVIGATOR.] is displayed. Programmes recorded without
deleting data as instructed are not registered in the list.

END : MENU

CATEGORY SETTING

MOVIE

MUSIC

DRAMA

EDUCA

DOCUM

SPORT

CHILD

NEWS

OTHER

– – – – –

Search Functions

Jet Navigator

This VCR can display a list of the recorded programs on the
inserted video cassette on the TV screen. You can then
select the desired programme, and the VCR will quickly
locate its beginning and start playback.
Conditions for correct operation of the Jet Navigator function:
– The tape length of the inserted cassette must be set

correctly.

– The VCR must not be in the timer recording standby mode.
– A programme of at least 15 minutes must be recorded on

the tape.

Preparations

– Display the VCR picture on the TV.
– Be sure to set [JET NAVIGATOR] to [ON] (see page 13)

and perform recording.

Operations
1

Press the NAVI button 

4

 to display

the Jet Navigator list.
– Up to 14 programme data that

have been recorded last are
displayed on the Jet Navigator list.
(7 programme data for each page)

– When more than 15 programs have been recorded for

one cassette, the programme data are deleted from the
first one.

– When pressing NAVI button 

4

 during playback,

playback stops and the Jet Navigator list appears.

2

Press the NAVI button 

4

 several times to select the

programme that you want to locate and play back.
After more than 3 seconds, the VCR starts the search for
the beginning of the selected programme and playback
starts automatically.
– Every time you press the NAVI

button 

4

, the programme shifts

above.

– If, after playback has started, you

want to search for the beginning
of the same or another
programme, press the NAVI
button 

4

 .

Playback stops and the Jet
Navigator list appears.

To cancel the Jet Navigator list:

Press the MENU button 

U

.

END : MENU

JET NAVIGATOR

 DATE CH

ON

CATEGORY

1 0 / 1 8

1

1 0 :3 0

M U S I C

1 0 / 1 9 2 4   1 5 :0 0 S P O R T
1 0 / 2 1

5

22 :1 5

1 0 / 2 3 A 2

20 :0 2

1 0 / 2 6

4

1 9 :1 0 E D U C A

1 0 / 2 7

2

2 0 :0 2

1 0 / 2 7 1 2

20 :3 0

END : MENU

JET NAVIGATOR

DATE

CH

ON

CATEGORY

1 0 / 1 8

1

1 0 :3 0

M U S I C

1 0 / 1 9 2 4   1 5 :0 0 S P O R T
1 0 / 2 1

5

22 :1 5

1 0 / 2 3 A 2

20 :0 2

1 0 / 2 6

4

1 9 :1 0 E D U C A

1 0 / 2 7

2

2 0 :0 2

1 0 / 2 7 1 2

20 :3 0

END : MENU

JET NAVIGATOR

 DATE CH

ON

CATEGORY

1 0 / 1 8

1

1 0 :3 0

M U S I C

1 0 / 1 9 2 4   1 5 :0 0 S P O R T
1 0 / 2 1

5

22 :1 5

1 0 / 2 3 A 2

20 :0 2

1 0 / 2 6

4

1 9 :1 0 E D U C A

1 0 / 2 7

2

2 0 :0 2

1 0 / 2 7 1 2

20 :3 0

Summary of Contents for NV-FJ730 Series































Reviews: