Panasonic NV-DS65, Operating Instructions Manual

Page: 45 / 60

45
WEBCAM: PC connection mode
(in Camera mode or VCR mode)
STORAGE: PC connection mode
(in Card playback mode)
00: Remaining Number of Card
Photoshot pictures
(
l
39)
100-0001: DCF Number (
l
40)
D-001: Number of prints set by DPOF
(
l
43)
1(white): File Number ([640
k
480] Image
size) (
l
40)
1(green): File Number ([320
k
240] Image
size) (
l
40)
¥
: DPOF Setting completed (
l
43)
640: [640
k
480] Image size
≥
For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
320: [320
k
240] Image size
640: From 640 to 800 (The size is not
displayed at under 640 pixels.)
SVGA: From 800 to 1024
XGA: From 1024 to 1280
SXGA: From 1280 to 1600
UXGA: Over 1600
ª
To Change the Counter Display
Mode
By changing [C.DISPLAY] on the [DISPLAY
SETUP] Sub-Menu, you can change the Counter
Display Mode to Tape Counter Indication
[COUNTER] (0:00.00), Memory Counter
Indication [MEMORY] (M0:00.00), and Time Code
Indication [TIMECODE] (0h00m00s00f).
(
l
15)
By repeatedly pressing the [COUNTER] Button on
the Remote Controller, you can change the
Counter Display Mode.
ª
To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY SETUP] Sub-Menu.
(
l
15)
You can also press the [DATE/TIME] Button of the
Remote Controller repeatedly to display or change
the Date/Time Indication.
ª
To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL], Partial Display
[PARTIAL], and Minimum Display [OFF].
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
≥
Some Indications may not be displayed
according to the model.
3
: Condensation has occurred. (
l
51)
Y
: The accidental erasure prevention
slider on the inserted Cassette is
open (that is, set to [SAVE]).
You are about to do audio dubbing
on the unrecorded (blank) portion
of the tape.
No Cassette is inserted.
(
l
12)
6
: The Battery is low. Recharge it.
(
l
10)
0
: The button-type battery is
discharged.
(
l
17)
:
: The video heads are dirty. (
l
52)
2
END: The tape came to end during
recording.
REMOTE: Wrong Remote Controller Mode
has been selected.
(
l
46)
UNPLAYABLE TAPE (OTHER FORMAT):
You are attempting to play back a
tape section that has been
recorded with a different TV
system.
UNABLE TO A. DUB (LP RECORDED):
Because the original recording was
done in LP Mode, audio dubbing
cannot be performed.
INCOMPATIBLE TAPE:
This Cassette is incompatible.
CARD LOCKED:
When you are attempting to write
the data on an SD Memory Card
whose write protection switch is set
at [LOCK].
FILE LOCKED:
When you are attempting to delete
a locked picture. The locked picture
cannot be deleted.
NO SPACE LEFT:
Card does not have sufficient
memory remaining.
CARD FULL: Card does not have sufficient
memory remaining.
NO CARD: Card is not inserted.
NO PICTURE:
Card has no pictures recorded on it.
CARD ERROR:
This Card is not compatible with
this Movie Camera.
EG-ENG.book 45 ページ ２００３年１月６日 月曜日 午後３時４３分