- Eng-38 -
English
Before Requesting Service
(continued)
ALL THESE THINGS ARE NORMAL:
Sounds will occur when
using the Steam function.
This is caused by air mixed when the water tank is working. This is
normal.
Steam accumulates on
the oven door and warm
air comes from the oven
vents.
During cooking, steam and warm air are given off from the food.
Most of the steam and warm air are removed from the oven by the
air which circulates in the oven cavity. However, some steam will
condense on cooler surfaces such as inside and/or on the oven door.
This is normal and safe. Steam will disappear after the oven is cooled
down.
Steam leaks out from all
four sides of the oven
door.
When a function related to steam is used, a lot of steam is generated
in the oven cavity during operation of the product. Some steam may
leak from all four sides of the oven door. This is normal.
I accidentally operated
my oven without any
food in it.
Operating the oven empty for a short time will not damage the oven,
however, it is not recommended.
The oven has an odour
and generates smoke
when using Convection
and Steam Convection
function.
It is essential that your oven is wiped out regularly, particularly after
cooking by Convection and Steam Convection. Any fat and grease
that builds up on the roof and walls of the oven will begin to smoke if
not cleaned.
The fan motor continues
operating after cooking is
over.
After using the oven, the fan motor will operate for several minutes to
cool the oven and electric components. This is normal.
The rear side of the oven's
color has yellowing.
Metal ions will generate yellow marks when heated. This is normal
and will not affect the use of the oven or cause harm to human health.
Door seal may be
deformed.
The door seal may be distorted due to high temperature. This is
normal and will not affect the performance of use of the oven.
Some smoke will be given
off from the cavity when
using different kinds of
Convection for the fi rst
time.
This is caused by the excessive oil in the cavity used for rust
protection.
The part where the power
supply cord connects to
the product's bottom plate
has loosened.
This is normal.
F0003BM03HP_Eng_170306.indd 38
2017/3/6 8:50:54
