Panasonic NS1000, Manual

Page: 91 / 303

11. When Registered, the Ext will show as
INS, MAC address and s/w version etc
10. The Terminal will register to the first available
port once the desired Ext number is input.
EXIT CLEAR ENTER
Ext 101
9. Enter the desired Ext
number and press ENTER
(NT3xx Display)
Note:
a.) If extension number is set in V-IPEXT32, but has no PT registration, the IP-PT will
automatically register to the first available Port/ Ext number (you will not be prompted
to enter an Ext number from the PT.)
b.) If you enter a number which is already used, you will hear an error tone.
c.) If you do not input an Ext number within 60s, then the IP-PT will register to an available
port (No Ext Number). The desired Ext Number can then be set via the WebMC.
2.2 PBX System Configuration (4)
Connect the NT Series IP-PT to the network (which includes DHCP Server) and input the desired Ext
number via the IP-PT Keypad when prompted.