Panasonic NR-DZ601V, Operating Instructions Manual, Page: 14 / 28

Prime Fresh room
Easy to cut.
The partially-
frozen food is
easy to cut!
It comes in handy.
The temperature in the Prime Fresh case can be selected from “Min”, “Med”, or “Max”.
When using the refrigerator, temperature can be adjusted according to your personal usage.
*The temperature is set at “Med” as default from factory.
Using Prime Fresh room
Approx. -5 °C ~ -1 °C
● This room is suitable for storing fresh food such as meat or fish.
Compared to storing in the Fridge room, the
storage life of meat or fish becomes longer.
● When food is frozen too much...
Sliced raw fish or meat may be frozen too much.
Set the temperature control to “Min” to prevent
food from over frozen.
● When food is not partially-frozen...
Depending on the type of food such as a block
of meat or a large fish, the storage conditions
and the ambient temperature, food may not be partially-frozen as it intended.
Set the temperature control to “Max” (P. 10).
„
How to operate the “Prime Fresh+” mode
1. Model : NR-DZ601W
1
Touch the [Enter] button to start using the door control panel.
2
Touch the [Up] or [Down] button until LED lights up at [Prime Fresh+], then touch the
[Enter] button to select.
3
Touch the [Enter] button again to confirm selection.
4
When setting is completed, there is a buzzer sound and [Prime Fresh+] LED turns on.
●If you want to stop the “Prime Fresh+” operation immediately, repeat step
1
-
3
.
The [Prime Fresh+] LED will turn off.
2. Model : NR-DZ601V
●Press the button [Zone Select] to select [B] (Prime Fresh), then press [Temp. Select] until the
light LED [Prime Fresh+] turns on. “Prime Fresh+” mode starts after about 10 seconds.
●If you want to stop the “Prime Fresh+” operation immediately, press the button [Zone Select] to
select [B] (Prime Fresh), then press [Temp. Select] until the light LED [Prime Fresh+] turns off.
●The system will stop the “Prime Fresh+” operation automatically when it runs for 105 mins
(as ambient temperature is 18 °C or lower) or 145 ~ 150 mins (as ambient temperature is
19 °C or higher) and return to normal mode. (The light LED [Prime Fresh+] turns off.)
●The light LED [Prime Fresh+] flashing means that the defrosting system is now working.
●The “Prime Fresh+” mode will start right after the defrosting operation is finished.
Prime Fresh+
When “Prime Fresh+” mode is active, if you set the “Quick Freezing” mode, the “Prime Fresh+”
mode will stop and fridge activates “Quick Freezing” mode and vice versa.
Remark
Remark
When “Prime Fresh+” is set, the Prime Fresh room will reduce the temperature quickly for
better performance of preserving food.
14