Introduction
Appendix
Bottom freezer case (Freezer compartment)
1
Pull the freezer draw out towards yourself.
2
Lift up the drawer slightly and pull towards
yourself until it reaches the stoppers.
2
2
2
1
1
3
Lift both sides of the bottom freezer case
and move upward.
Attention
●
The contact sections of the drawer rails have been coated with lubricant.
Do not wipe it off.
(The lubricant complies with the Food Sanitation Law.)
Once every 3 months
ICE TWISTER (Quick Ice Making corner)
Removing
1
Unhook the protrusion by lifting it
upward and pulling the ice twister
and ice box forward until completely
removed.
ICE TWISTER
2
2
2
1
1
1
Attaching
2
Push the ice twister and ice box until it
reaches the end lock.
ICE BOX
2
2
2
1
1
1
Attention
●
You can disassemble the ice twister, ice box or removing ice twister sets
to increase space in the freezer.
Once every 3 months
Evap pan (Backside of the refrigerator)
Removing
1
Tilt up the evap pan a bit and then lift it
upward until the evap pan hole unlocks
from the hook evap pan.
2
Pull the evap pan until it touches with the
evap pipe then carefully take it out under
the evap pipe.
2
2
2
1
1
1
Attaching
1
Insert the evap pan under the evap pipe.
2
Insert the evap pan hole into the hook
evap pan as well as press-fitting both
sides.
2
2
2
2
2
2
1
1
1
Hook evap pan
Evap pipe
Requests
●
Do not damage or deform the evap pipe.
14
AK-177470_T0217-0_EN.indd 14
AK-177470_T0217-0_EN.indd 14
1/28/17 10:14 AM
1/28/17 10:14 AM
