background image

Prime Fresh Case

The temperature in the Prime Fresh case can be selected as below:

•  The temperature for soft freeze is -1 °C ~ -5 °C. 
•  The temperature to use the Prime Fresh case as the Fridge compartment is 4 °C ~ 0 °C.

When using the refrigerator, the temperature can be adjusted according to your usage.
*The default temperature setting of Prime Fresh case is -3 °C. 

Using Prime Fresh case

Approx. -1 °C ~ -5 °C

 

● This room is suitable for storing fresh food, such as meat or fish. Compared to storing in 

the Fridge compartment, the storage life of meat or fish becomes longer.

 

When food is frozen too much. 

Sliced raw fish or meat may be frozen too 

much. Set the temperature to higher than  

-3 °C to prevent food from over frozen.

 

When food is not partially-frozen. 

Depending on the type of food, such as a 

large block of meat or a large fish, the storage 

conditions and the ambient temperature, food may not be partially-frozen as it intended. 

Then, set to the lowest temperature -5 °C.

 

Do not over stock with too many food items. When there are too many food items and 

there is no space for cool air circulation inside the refrigerator, the cooling capacity will be 

affected. Provide sufficient space between foods inside Prime Fresh case.

 

● When storing food in large amount, e.g. a large block of meat, a large fish or a chicken, it 

is advisable to place the food at the center of the Prime Fresh case to optimize the cooling 

performance.

 

When the temperature of the Prime Fresh case is set at 4 °C ~ 0 °C, the Prime Fresh+ 

mode will not operate in order to prevent food spoilage.

 

Do not block the cool air outlet with food items inside the Prime Fresh case. 

If the cool air does not spread into every corner of Prime Fresh case, then the interior will 

not be sufficiently cooled and the food may be affected. Therefore, food should not be 

placed in front of the Cooling air guide (on the Prime Fresh case) to prevent blocking the 

air circulation inside the room.

Easy to cut.

The partially - 

frozen foods is

easy to cut!

It comes in handy

Cooling air guide
Prime Fresh case

36

Summary of Contents for NR-CW530H

























































Reviews: