English
8
9
Operation
Operation
●
Normally, the indicators are off to save electricity.
• All indicators turn on when the power is turned on, and then turn off after approximately 5 seconds.
• During Auto ice making off, quick freezing or ECO NAVI operation, the corresponding lamp is on to notify you that
the operation is being performed.
■
Adjust the temperature
Normally, use the refrigerator with the temperature set to “ 2 ” .
The temperature can be adjusted, however, if you desire to change the chilling condition.
(If the temperature control of the freezer compartment or refrigerator compartment is
set to other than “ 2 ”, ECO NAVI operation stops.)
(These are rough indications for when the ambient temperature is 30
℃
, there is no food in the refrigerator,
and the interior temperatures have stabilized. The temperatures may differ depending on the ambient
temperature, food storage state, door opening/closing, and other usage conditions.)
Approximately 2
℃
to 3
℃
lower than “ 2 ”
Approximately
－
18
℃
to
－
20
℃
Approximately 2
℃
to 3
℃
higher than “ 2 ”
FREEZER
Display
Approximately 2
℃
to 3
℃
lower than “ 2 ”
Approximately 3
℃
to 5
℃
Approximately 2
℃
to 3
℃
higher than “ 2 ”
If no operation is performed for approximately 10 seconds when a setting is being changed,
the indicators turn off.
If they turn off, perform the setting operation again from the beginning.
Select “FREEZER” or “FRIDGE”.
【
FREEZER
】
【
FRIDGE
】
①
Press the button.
②
Press the button to make
or flash.
●
Settings can only be changed when the refrigerator compartment doors are closed.
●
If “CL” is displayed on the notice indicator area when a button is pressed, the operation lock is set. (P. 20)
●
Do not subject the control panel to a strong impact, or hit it with a hard object.
(The surface may be cracked or scratched.)
●
For explanation purposes, all the indicators
are turned on.
ECO NAVI lamp
(Green
）
Turns on during ECO NAVI operation (P. 27)
• If the temperature control of the freezer
compartment or refrigerator compartment is set
to other than “ 2 ”, ECO NAVI does not operate.
Detects the brightness within the refrigerator
range, and performs ECO NAVI operation.
• Occurrence of abnormality, demo mode (P. 17)
• Operation lock
「
CL
」
(P. 20)
Always on during QUICK FREEZING (P. 11)
Always on during AUTO ICE OFF (P. 13)
• You can turn off the "AUTO ICE OFF"
if you will be bothered by the display. (P. 20)
Turns on when each temperature control is set
【
Settings at time of purchase
】
Light intensity sensor
Notice indicator
Quick freezing
Auto ice making off
Displays the temperature
settings of the freezer
compartment and the
refrigerator compartment
Selection UP button
(moves selection up)
Menu/Enter button
Selection DOWN button
(moves selection down)
Freezer compartment
Refrigerator compartment
2
2
Procedure
Display
③
Press the button to confirm
or .
④
Press the or button to make the desired
indicator flash.
(The indicator that flashes changes with each press.)
⑤
Press the button. A beep sounds and
the setting is completed.
(After a short time, the indicator turns off.)
Notices
FRIDGE
Change the item to the desired setting.
How to view and operate the Control panel
