Installation
Do not install the unit on the following
locations:
●
Locations subject to heat and direct sunlight
(The cooling power will be reduced and
electricity wasted.)
●
Poorly ventilated locations with high humidity
(It may become rusted and cause leakage
current.)
●
Locations where the surface is unstable and
slanted
On carpet, mats, or vinyl
fl
oors, place a
plate underneath the refrigerator.
●
Locations not allowing the power plug to be
cleaned easily
(Dust accumulated may cause a
fi
re.)
Has a heat radiating space been
provided around the refrigerator?
10 cm or more
at the back of
the refrigerator
5 cm or more
both left and right
30 cm or more
above the
refrigerator
Refrigerator doors should not be opened
during the interior cooling process.
The doors should not be
opened until the interior has
cooled down suf
fi
ciently.
(Warm air
fl
owing into the
interior will block the cooling
function.)
Please wait until the interior has cooled
down.
●
It may take approximately four hours to cool
down the interior.
●
It may take 24 hours or more to cool down
the interior and achieve equilibrium.
Fix the refrigerator.
Turn the adjuster
bolt (right and left)
until they reach the
fl
oor to stabilize the
refrigerator.
Requests and notices
Do not peel the seal on the back.
Otherwise, the cooling performance
may deteriorate. If you have peeled
it, then cut a cloth packing tape
into a square and paste it onto the
refrigerator.
●
The
fi
rst operation of the
compressor or the fan will cause
a little bit noise but it is normal as
it is working in high-speed.
Once the interior cool down, the
sound will become smaller and
normal.
Have any measures
taken against tipping
due to earthquakes?
In order to prevent the
refrigerator from tipping,
permanently
fi
x it by using
belts, etc.
Seal
Operation
Installation
(Before using for product.)
8
ARAH0A106850_EN.indd 8
ARAH0A106850_EN.indd 8
10/1/2562 BE 10:48
10/1/2562 BE 10:48
