Panasonic NP-B6M2FTNZ Operating Instructions & Installation Instructions Download

Page: 40 / 48

Troubleshooting

Error codes & what to do

ERROR

CODE ERROR DESCRIPTION

CONTROL

There is a water overflow

• Power off your machine and close the tap.

• Contact an Authorised Service Centre.

The waste water in the

machine cannot be

discharged.

• Water discharge hose is clogged.
• The filters of your machine might be

clogged.
• Power off-on your machine and activate

the programme cancellation command.
• If the error continues, contact an Authorised

Service Centre.

Error of continuous water

input

• Close the tap.
• Contact an Authorised Service Centre.

Inadequate water supply

• Make sure the water input tap is totally

open and that there is no water cut.
• Close the water input tap, remove the water

input hose from the tap and clean the filter at

the connection end of the hose.
• Restart the machine. If the problem persists,

contact an Authorised Service Centre.

Faulty heater sensor

• Contact an Authorised Service Centre.

Overheating error

(temperature in the

machine is too high)

• Contact an Authorised Service Centre.

Divisor position error

• Contact an Authorised Service Centre.

Heater error

• Contact an Authorised Service Centre.

Faulty electronic card

• Contact an Authorised Service Centre.

Summary of Contents for NP-B6M2FTNZ

















































Search results

Summary of Contents for NP-B6M2FTNZ

Reviews:

Related manuals for NP-B6M2FTNZ

Brands by name

Popular brands

Panasonic NP-B6M2FTNZ, Operating Instructions & Installation Instructions

Search results

Summary of Contents for NP-B6M2FTNZ

Reviews:

Related manuals for NP-B6M2FTNZ

Brands by name

Popular brands