Panasonic NP-6R2MUQNZ-NZ, Service Manual

Page: 7 / 40

7
3.3. Access drain pump
1. Drain off the water in the dishwasher, and disconnect the power supply.
(Note : Make sure to remove remained water in the dishwasher. If not, wet the floor.)
2. Loosen the hooks, and then remove bottom board.(Note:You should first loosen the top hooks, then the left and right hooks.
and be care do not break the hook.)
3. Label and disconnect the two terminal lugs from the drain pump.
4. Turn the drain pump in anti-clockwise direction to take it off.
5. Reverse the above procedure to install.