background image

11

Function of Detergent

Detergent with its chemical ingredients are necessary to remove dirt; it breaks down the 
dirt to smaller particles and removes them out of the Dishwasher. Most of the commercial 
quality detergents are suitable for this purpose.

 

Note: 

Proper Use of Detergent
•  Use only detergent specifi cally made for the use in Dishwashers. Keep the detergent 

fresh and dry.

•  Do not put powdered detergent into the dispenser until ready to wash the dishes.

  Detergents

There are 3 types of detergents:

1. 

With phosphate and chlorine.

2. 

With phosphate but without chlorine.

3. 

Without phosphate and chlorine.

•  If detergents without phosphate is used and white spots appear on dishes and 

glasses. In this case, add more detergent to reach better results.

•  Detergents without chlorine will only slightly bleach, strong and coloured spots will not 

be removed completely. In this case, choose a programme with a higher temperature.

  Concentrated Detergent

Based on their chemical composition, detergents can be split in two basic types:

1. 

Conventional, alkaline detergents with caustic components.

2. 

Low alkaline concentrated detergents with natural enzymes.

  Detergent Tablets

Detergent tablets of different brands dissolve at different speeds. For this reason some 
detergent tablets cannot dissolve and develop their full cleaning power during short 
programmes. Therefore, use long programmes when using detergent tablets to ensure the 
detergent tablet is completely dissolved.

Using the Dishwasher

Summary of Contents for NP-6F2MUQNZ





































Reviews: