12
Cooking
Keep Warm
(Will keep food warm for up to 30 minutes after cooking)
1
If cooking at high power (10),
skip to step 2. Press
Power
Level
until the desired power
level appears in the display.
P10 is the highest and P1 is the
lowest. P0 is the keep warm
feature.
Press
Power Level
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
P10 (HIGH)
P9
P8
P7 (MED-HIGH)
P6 (MEDIUM)
P5
P4
P3 (MED-LOW)/
DEFROST
P2
P1 (LOW)
P0 (KEEP WARM)
2
Set cooking time using the
Number
pads. P10 (HIGH) and
P0 (KEEP WARM) have max.
cooking time of 30 minutes. For
other power levels, the max.
time is 99 minutes, 99 seconds.
3
Press
Start
; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
NOTES:
1. For reheating, use P10 (HIGH)
for liquids, P7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
2. For defrosting, use P3
(MED-LOW).
3. After pressing
Start
, the
selected power level can
be recalled. Hold
Power
Level
for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.
DO NOT OVERCOOK
:
This oven requires less time
to cook than older units.
Overcooking will cause food to
dry out and may cause a fire.
A microwave oven’s cooking
power tells you the amount of
microwave power available for
cooking.
Multistage Cooking:
For more than one stage of
cooking, repeat steps 1 and 2
for each stage of cooking before
pressing
Start
. The maximum
number of stages for cooking
is three. When operating, two
beeps will sound between each
stage. Five beeps will sound at
the end of the entire sequence.
Automatic function (such as
Frozen Foods, Sensor Cook
(Reheat), Popcorn, Coffee/Milk
and Turbo Defrost) can not be
used with 3 stage cooking.
1
Press
Power Level
11 times to
select the P0 (KEEP WARM)
.
2
Set warming time using
Number
pads (up to
30 minutes). Set 20 minutes
cooking for an example.
3
Press
Start
; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
NOTES:
1.
P0 (KEEP WARM)
can be set
as the final stage after cook
time has been manually
entered. It cannot be used
with Automatic function
(such as Frozen Foods,
Sensor Cook (Reheat),
Popcorn, Coffee/Milk and
Turbo Defrost.
2. After pressing
Start
, the
selected power level can
be recalled. Hold
Power
Level
for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.
Operation (continued)
