9
Operation (continued)
Cooking (continued)
3
Press
Dial
; the cooking will start
and the time will count down in
the display. At the end of
cooking, five beeps will sound.
NOTES:
• For reheating, use P10
(HIGH) for liquids, P7
(MED-HIGH) for most
foods, and P6 (MEDIUM)
for dense foods.
• For defrosting, use P3
(MED-LOW).
• Please refer to the defrosting
chart and the defrosting tips
& techniques on page 11.
• In order to protect the
product from overcooking,
by cooking at P10 power
for an extended period of
time, the power level will
automatically change to
P8 after 15 minutes.
DO NOT OVERCOOK:
This
oven requires less time to cook
than older units. Overcooking
will cause food to dry out and
may cause a fire. A microwave
oven’s cooking power tells you
the amount of microwave
power available for cooking.
Stage Cooking:
For more than one stage of
cooking, repeat steps 1 and 2 for
each stage of cooking before
pressing
Dial
. The maximum
number of stages for cooking is
three. When operating, a beep
will sound between each stage.
Five beeps will sound at the end
of the entire sequence.
P10 and P9 can be set only once
in the stage cooking, and if the
P10 or P9 is set in any stage,
only P8 or less can be set for the
rest of the stage.
Setting a Standing
Time
1
Some recipes call for a
standing time after cooking.
To do this, repeat steps 1 and
2 in the
Cooking
section on
previous page. Then press
Cooking Timer/Clock
.
2
Set desired amount of
standing time using
Dial
(up
to 90 minutes).
3
Press
Dial
. The timer will start
and then beep once at the
end of cooking time (the
beginning of standing time).
Five beeps will sound when
standing time is done.
Setting a Delayed
Start
1
The start time can be delayed
to start cooking at a later
time. To do this, first press
Cooking Timer/Clock
.
2
Enter the desired delay time
(up to 90 minutes) using the
Dial
.
3
Press
Power Level
until the
desired power level appears
in the display. P10 is the
highest and P1 is the lowest.
4
Set Cooking Time using the
Dial
(see previous page for
maximum times).
5
Press
Dial
; the delay time will
count down, then cooking will
begin. At the end of cooking,
five beeps will sound.
NOTES:
• When each stage finishes,
the oven will beep once.
At the end of the program,
the oven will beep five
times.
• If the oven door is opened
during Standing Time,
Kitchen Timer or Delay
Time, the time on the
display will continue to
count down.
• Standing Time and Delay
start cannot be
programmed before any
automatic function. This is
to prevent the starting
temperature of food from
rising.
• Stage Cooking can be
programmed including
Standing Time and Delay
Start.
Summary of Contents for NN-SD66LS
Page 2: ......
