8.6. Confirm after repair
1. After repair or replacement of parts, make sure that the screws of the
oven, etc. are neither loose nor missing. / Microwaves might leak if
screws are not properly tightened.
2. Make sure that all electrical connections are tight before inserting the
plug into the wall outlet.
3. Check for microwave energy leakage. (Refer to procedure for
measuring microwave energy leakage.)
CAUTION / MICROWAVE RADIATION
DO NOT BECOME EXPOSED TO RADIATION
FROM THE MICROWAVE GENERATOR OR OTHER
PARTS CONDUCTING MICROWAVE ENERGY.
19
Summary of Contents for NN-S252BF APH
