Panasonic NN-S215WF, Service Manual

Page: 14 / 38

3. When replacing faulty switches, be sure mounting tabs are not
bent, broken or otherwise deficient in their ability to hold the
switches.
6.5. Avoid inserting nails, wire, etc. through any holes in the unit
during operation.
Never insert a wire, nail or any other metal object through the lamp holes on the cavity or any
other holes or gaps, because such objects may work as an antenna and cause microwave
leakage.
6.6. Confirm after repair
1. After repair or replacement of parts, make sure that the screws of
the oven, etc. are neither loose nor missing. / Microwaves might
leak if screws are not properly tightened.
2. Make sure that all electrical connections are tight before inserting
the plug into the wall outlet.
3. Check for microwave energy leakage. (Refer to procedure for
measuring microwave evergy leakage.)
CAUTION / MICROWAVE RADIATION
USE CAUTION NOT TO BECOME EXPOSED TO
RADIATION FROM THE MICROWAVE
MAGNETRON OR OTHER PARTS CONDUCTING
MICROWAVE ENERGY.
IMPORTANT NOTICE
1.The following components have potentials above
2000V while the appliance is operated.
* Magnetron
* High voltage transformer
* High voltage diode
* High voltage capacitor
Pay special attention to these areas.
2.When the appliance is operated with the door
hinge or magnetron adjusted incorrectly, the
microwave leakage can exceed more than 5mW/cm
2
. After repair or exchange, it is very important to
check that magnetron and the door hinge is
correctly installed.
7. DISASSEMBLY AND PARTS REPLACEMENT
14