Panasonic NN-A883WB, Service Manual

Page: 23 / 48

instructions below for proper installation and adjustment so as to prevent excessive microwave
leakage.
1. When mounting the door to the oven, be sure to adjust the door
parallel to the bottom line of the oven face plate by moving the
upper hinge in the direction necessary for proper alignment.
2. Adjust so that the door has no play between the inner door
surface and the oven front surface. if the door assembly is not
mounted properly, microwave power may leak from the clearance
between the door and oven.
3. Perform the microwave leakage test.
Figure 7
Disassembly of the door
9.7. Turntable Motor
1. Remove the motor cover by breaking off at the 8 spots indicated
by the arrows.
2. Disconnect the two lead wires connected to the turntable motor
3. Remove the turntable motor by removing the two screws
Note: After breaking off the motor cover, make sure that cut-off portions are properly trimmed
off or bent inside so that no sharp edges are exposed.
Note: To secure the motor cover use a 4 x 6 screw.
Figure 8