Panasonic NN-A720MB, Manual

Page: 33 / 65

these hooks during disassembly.
4. Remove the door key and spring form the door E
After replacement of the defective component parts of the door, reassemble it and follow the
instructions below for proper installation and adjustment so as to prevent excessive microwave
leakage.
1. When mounting the door to the oven, be sure to adjust the door
parallel to the bottom line of the oven face plate by moving the
upper hinge in the direction necessary for proper alignment.
2. Adjust so that the door has no play between the inner door
surface and the oven front surface. if the door assembly is not
mounted properly, microwave power may leak from the clearance
between the door and oven.
3. Perform the microwave leakage test.
Figure 7
Disassembly of the door
Figure 8
Adjusting the door hinge
9.7. Turntable Motor
1. Remove the motor cover by breaking off at the 8 spots indicated
33