Panasonic NI -FS770, Operating Instructions Manual

Page: 4 / 18

06 07
English
Fully insert the power plug.
- Failure to do so may cause fire or electric shock.
English
Do not use the appliance with the exception of
fabric (e.g. leather).
- Doing so may cause damage it.
Do not place the
appliance sidelong.
- Doing so may cause
scalds.
Do not use the appliance near walls or furniture
that cannot withstand high temperature or humidity.
- Doing so may damage the wall or furniture.
After using the appliance, while the steam still
comes out, do not put it back on the base.
- Doing so may cause scalds.
Do not use steam when using a mitten for iron.
- Doing so may cause scalds.
Once the steam button is released, the iron will
continue to emit steam for a short time. So keep
yourself away from it.
Put the appliance back on
the base after the steam stops.
- Otherwise it may cause scalds.
Disconnect the power plug by holding the power
plug instead of pulling the power cord.
- Failure to do so may break the power cord, and may
cause burns, electric shock, or fire due to a short circuit.
When using with following fabric, test on an
inconspicuous area, or place a cloth over the
fabric to prevent the fabric from marking.
• Expensive or specially processed fabrics (velvet,
acrylic, nylon, cashmere, etc.)
• Fabrics that are labeled as " low heat " or " medium
heat ", or dark colored fabrics.
- Failure to do so may cause damage fabric.
Always unplug the power plug during filling,
emptying, cleaning and not in use.
- Failure to do so may cause electric shock or fire due
to electrical leakage resulting from insulation
deterioration.
The main body must be firmly rested on the base.
When placing the main body on its base, the base
must be placed on a flat and stable surface. When
it is used as a horizontal steam
iron, it must be used and rested
on a flat, stable surface.
- Failure to do so may cause scalds.
CAUTION
Do not store the cord in a twisted state.
- Doing so may cause breakage to the wire of the cord,
and may cause electric shock or fire due to a short
circuit.
Do not touch the steam during use.
• Do not aim the steam towards your
hand, knee, or any other part of the
body.
• Do not iron the clothes that you are
wearing.
- Doing so may cause scalds.
MAX
Do not insert pins or needles into the appliance or
use it on clothes with sewing needles or the like
inserted.
- Doing so may cause fire due to they are in.
Do not place the base on the unstable locations or
heat-sensitive rugs.(carpets, resin made rugs, etc.)
- Doing so may cause damage to the rug, injury or
burns.
Usage caution
Depending on the direction the main body is held toward,
water would not be supplied from the water tank and steam
would not come out. Please check the figure as below.
Right direction Wrong direction
Do not touch the hard
objects(e.g zipper, button).
- The soleplate may be
scratched.
When filling the water tank, please use the cup
provided as accessories.
- Failure to do so may damage the iron due to water overflow.
When ironing wet clothes, please use the
dry-ironing mode.
- Failure to do so may cause scalds due to hot water
splashes from the main body.
Make sure to drain the water completely after use.
- Failure to do so may cause scalds due to hot water
leaks if any residual water from last use is still left.
Do not add hot water in the water tank.
- Doing so may cause burns due to hot water splashes.
Do not add perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the
water tank.
- It will cause scalds or getting dirty due to the
damaged product.
Do not touch the hot surface (such as soleplate,
side of the main body).
- Doing so may cause scalds.
・ When using an ironing board through
which steam can penetrate, do not
place your hand, leg, etc. under the
ironing board.
・ Do not place the appliance on your
hand, knee, or other part of the body.
・ Do not use steam when the appliance is partially
sticking out from the ironing board.
・ Do not iron clothes while wearing them.
Fill the water tank with distilled water or pure water.
- Otherwise it will make the product damaged or dirty,
which shortens the lifetime of the product.