16
Usage 1(
Read/Write TAG
)
STEP1
Select virtual COM port
(connect to the board)
STEP3
Push the “Connect” button
STEP4
Push the reset switch on the
board
STEP5
Starting log is displayed
■Connect to the target board
STEP6
Input memory address
(16-byte alignment hexadecimal number)
※
A click of a cell will input an address automatically
STEP7
Input length (
hexadecimal numbe
r)
[NFC-TAG memory]
・ MN63Y1210A/1213
0x01 ～ 0x200 [1～512 byte]
・MN63Y1214/1221
0x01 ～ 0x400 [1～1024 byte]
[tunnel memory]
0x01 ～ 0x1000 [1～4096 byte
]
STEP8
Push Read / Write button
※Before you write, set value to cell.
■Read/Write memory
STEP2
Select the TAG LSI model
User Area
Config Area
System Area
load/save the dump data.
Write all data
Read all data
NFC-TAG
memory
tunnel memory
TAG Read/Write
BCC calculated value is displayed
* if the value of BCC set in the system area
has a problem, it is displayed with red.
（
not use for MN63Y1210A
）
After performing the contents of the [start-up procedure], start the PC software.
