Panasonic NE9051BBQP, Service Manual

Page: 14 / 30

2. Adjust so that the door has no play between the inner door
surface and the oven front surface. If the door assembly is
not mounted properly, microwave power may leak from the
clearance between the door and oven.
3. Perform the microwave leakage test.
Disassembly of the door.
Figure 7
Adjusting the door hinge.
Figure 8
8.7. Turntable Motor
1. Remove the motor cover by breaking off at the 8 spots
indicated by the arrows.
2. Disconnect the two lead wires connected to the turntable
motor.
3. Remove the turntable motor by removing the two screws.
Note: After breaking off the motor cover, make sure that
cut-off portions are properly trimmed off or bent inside so
that no sharp edges are exposed.
Note: To secure the motor cover use a 4 x 6 screw.
Removing the turntable motor cover.
Figure 9
Removing the two scews fixing the turntable motor.
Figure 10
13
NE-9051BBPQ