- 20 -
Installation Instructions for Stacking
IMPORTANT
Disconnect the power cord from the wall socket
1.
before attempting installation.
For stacking installation, you must use the
2.
PANASONIC Joint Plate (sold separately).
The combination of the units for stacking is limited
3.
to only the following PANASONIC models:
Models No. NE-1252, NE-1752, NE-1772, NE-2152
The
4.
maximum
stacking height is the total heights of
two units.
PREPARATION
Be sure the oven cavity is empty. Be sure surfaces
where ovens meet is clean and sanitized.
INSTALLATION
Stack the units and remove five screws (a) as shown in Fig.1.
1.
Loosen the screw (b).
2.
Projection on Joint Plate must face away from the oven. Place Joint Plate on the screw (b).
3.
Attach and tighten five screws (a) and the screw (b). See Fig.2.
4.
Ensure the top oven is at a safe and workable height.
5.
(b)
Joint Plate
Projection
(a)
Fig. 1
Fig. 2
Joint Plate
Projection
Summary of Contents for NE-1252
Page 36: ... 36 ...
Page 74: ...36 ...