- 13 -
How to Operate
C. Programming the Double Quantity Pad - For multiple portion heating:
Your oven is factory set to automatically double the programmed time tor multiple portion heating - this is the correct setting for
heating multiple portions of most small foods items. No further programming of the time is necessary for these food items. The
time required to heat multiple portions of some large platters and most bulk food loads is slightly less than double that of a single
portion.
This model incorporates a Multiple Portion Heating Custom Program feature that allows you to customize the heating time and/or
power level tor multiple portions of your menu items.
For example, if Memory Pad 3 is set for 6 minutes at DEFROST, 12 minutes at DEFROST is set for double quantity heating
automatically. However, if your own tests have determined that the correct heating times required is less (only 10 minutes 30
seconds at DEFROST) for two portions, the "Multiple Portion Heating Custom Program" feature can be programmed for 10
minutes 30 seconds at DEFROST.
Example: To program 30 seconds at HIGH Power on Memory Pad Number 2
1.
• Press the
PROG.
Pad.
NOTE:
• If no
PROG.
Indicator appeares in the
Display Window, "Program Lock" should be
cancelled (see page 14).
• Do not keep pressing
PROG.
Pad for more
than 30 seconds, or a false failure code
may result.
Display Window
2.
• Press
DOUBLE QUANTITY (x 2)
Pad.
3.
• Press Memory Pad 2.
The pad number and the previously
selected time and power level for multiple
portion heating will appear in the Display
Window.
• The pad number and Stage Heating
Indicator will appear in the Display Window
again.
4.
• Press the
POWER
Level Selector Pad
once. The Memory Pad display will go out.
5.
• Press the Memory Pads 3, 0.
6.
• Press the
PROG.
Pad again.
You have completed programming the
selected Memory Pad for multiple portion
heating.
• 2 seconds later, the setting for single stage
heating will appear in the Display Window.
• 2 seconds later, the Display Window will go
blank.
NOTE:
•
Program the remaining Memory Pad as desired by repeating steps 1-6 above. (You may insert up to 10 memory
programs.)
DO NOT OPEN THE OVEN DOOR while programming.
•
When the
PROG.
indicator is blinking, the program can be cancelled and/or the pad erased by pressing
STOP/RESET
Pad.
IP5102_3BS80RP_Eng_10_150121.indd 13
IP5102_3BS80RP_Eng_10_150121.indd 13
2015-1-21 10:00:35
2015-1-21 10:00:35
