7
MAIN PARTS IDENTIFICATION
Air volume display
nanoe
TM
X display
nanoe
TM
X display
Filter replacement display
Note: PM2.5 concentrations display and gas pollution level display is for reference
only, according to differrent environment, the display will be different.
The PM2.5 concentrations display may differ when the product is turned on
for the first time or when the PM2.5 concentration reaches a stable level by
rapid purification.
PM2.5 concentrations display
Gas pollution level display
The nanoe
TM
X icon displays
indicates nanoe
TM
X is being generated.
nanoe
TM
X will be generated in all
operation modes except you switch off
it. (P.11)
Filter replacement display
Child lock display
Child lock display lights up, indicates
open child lock.
Filter replacement display lights up,
indicates replace filters. (P.13)
Child lock display
PM2.5 pollution source display
LCD
Air volume display
Auto/Low/Med/High
Two different types of products may show different measured PM2.5
concentrations due to air circulation even in the same space.
PM2.5 concentrations display
Display with figure
Where there are sofas, beds, carpets, detergents, fragrances, cosmetics, perfumes, insects,
pets, etc., or where it is humid or smoky.
Where it is close to construction sites, roadsides, factories, entrances and exits, windows,
ventilators, etc.
Where you cook or use a humidifier, spraying agent or other products that may generate
steam or fine dust.
The air flow around the PM2.5 sensor may cause a difference to the PM2.5 concentration.
The PM2.5 concentration may differ when the product is used in the following indoor places.
When the measured PM2.5 concentration
is equal to or higher than 600 µ
g
/
m
3
,
600 µ
g
/
m
3
is displayed.
When the measured PM2.5 concentration
is lower than 600 µ
g
/
m
3
, the measured
value is displayed.
Gas pollution level display:
Blue: Indicates clean
Purple: Indicates slight dirty
Red: Indicates dirty
Show the air pollution levels detected
by gas sensor.
CONFIRMATION
AND SETUP