Panasonic Nanoe EH-SA43, Manual

Page: 28 / 40

28
English
1
1
Plug in the plug into the
household outlet.
2
2
Press the “
电源
” (power)
switch to turn on the
appliance.
The “
蒸汽
” (steam) lamp glows
red.
•
Firmly press the “
电源
”
(power) switch in completely.
Steam will be emitted from the steam outlet
after approximately 1 minute 30 seconds elapse.
•
A “clicking” sound can be heard right after the
power is turned on and steam completes. This is
not a malfunction.
•
Steam is not visible to the naked eye.
The temperature is also set slightly lower during
your sleep as a safety precaution.
•
Do not tilt, shake, or transport the device during
steam operation or within 10 minutes after steam
operation completes. Doing so may cause
scalding.
How to use
Operation of the Facial Steamer for night
Steam is generated for approximately 20 minutes
*1
,
followed by nanoe™ generated for approximately 8 hours.
(Approx. 8 hours 20 minutes)
Hydrated breeze steam
*2
“nanoe™”
(Approx. 8 hours)
(Approx.
20 minutes
*1
)
*1 The length of time of the hydrated breeze steam will
differ depending on the amount of water supplied to
the tank.
*2 The steam is mixed with the breeze, and the
temperature is set for safety purposes that also
make the steam invisible.
During steam During nanoe™ Finished
The “
蒸汽
”
(steam) lamp
glows red.
The “
纳米水离
子
” (nanoe™)
lamp glows blue.
The “
纳米水离
子
” (nanoe™)
lamp blinks blue
•
To prevent glaring, the “
纳米水离子
” (nanoe™) lamp
will gradually dim over approximately 1 minute after
use, but will not go out completely. In a brightly lit room,
it may be difficult to see this change in brightness.
EH-SA43_CH.indb 28 2013/04/04 16:03:39