13
English
Troubleshooting
Problem
Possible cause
Action
It switches frequently to cold air
while using in “Hot” mode, or sparks
can be seen within the body.
(These sparks are caused by the
thermostat switch which is the
protective device, and are not
dangerous.)
Lint has accumulated on the air inlet or air
outlet.
Hair or something is blocking the air inlet.
Remove accumulated lint.
(See page 10-11)
Do not block the air inlet.
The hot air is abnormally hot.
The plug is abnormally hot.
The connection to the household outlet is
loose.
Use a household outlet that fits
securely.
Sparks are generated inside the
nanoe™ outlet.
Abnormality caused by a dirty electrode
(needle portion).
Perform maintenance of the
nanoe™ outlet. (See page 11)
The nanoe™ outlet emits a noise
(crackling noise).
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorised by
Panasonic for repair.
Specifications
Power source
220 V
50-60 Hz
230 V
50-60 Hz
240 V
50-60 Hz
Power
consumption
1 350 W
1 500 W
1 600 W
Accessories
Quick-dry nozzle, set nozzle
This product is intended for household use only.