Panasonic nanoe EH-NA27, Operating Instructions Manual

Page: 10 / 52

10
English
Maintenance of the hair dryer
Always turn the power switch off and disconnect the plug
from the household outlet. (Except when performing
maintenance on the air outlet)
Maintaining the nanoe™ outlet
Clean the nanoe™ outlet at least once a month.
In order to maintain the generation amount of nanoe™.
1. Prepare a commercially available new
cotton swab.
2. Gently insert the swab in the nanoe™
outlet until it stops (about 10 mm), and
then turn the cotton swab 2‑3 times
carefully.
nanoe™ outlet
►
Note
• It is easier to clean the nanoe™ outlet with a narrow cotton swab
(for example, one intended for babies).
How to use the hair dryer
1
1
Before using the hair dryer, make sure that the
power switch is at position “ ”, then plug into
a household outlet and turn on the power
switch.
2
2
Select the intensity of the airflow with the
power switch, and then dry your hair.
3
3
Set the power switch to position “ ”, and then
remove the plug from the household outlet.
► Notes
• Drops of water may blow out of the nanoe™ outlet during
use, but this is not a malfunction.
• A humming noise may come out of the nanoe™ outlet, but
this is the sound of nanoe™ being discharged and is not a
malfunction.
• You may notice a characteristic odor when using this hair
dryer. This is not harmful to the human body.
• The effects of nanoe™ might not be felt by the following
people. People with crimpy hair, strong curly hair, very
smooth hair, short hair, or who have had a hair straightening
perm in the last three or four months.