Panasonic Nanoe EH-ANA3, Manual

Page: 22 / 28

22
English
Troubleshooting Troubleshooting
Problem Problem Possible cause Possible cause Action Action
During the hot air operation, cool air is
usually mixed, and even sparks appear.
(The spark is caused by the action of
thermoswitch as a protective device. It
is not a fault.)
·
When dust blocks the air inlet and
air outlet, the thermoswitch will be
started, and the cool air is usually
blown at the moment of start-up.
·
The air inlet is blocked by hair or
hand, etc.
·
Clear away the
accumulated dust
(See P.20 for
instructions).
·
Do not block the air
inlet.
The plug is abnormally overheating.
The household outlet connected to the
product may be loose.
Please use a well-
conditioned household
outlet.
During operation, the unit outputs air
intermittently.
The cord is damaged.
Immediately stop using
the unit.
The cord is abnormally overheating.
Sparks occur inside the nanoe™ outlet.
The electrodes have become dirty
resulting in an abnormality.
Clean the inside of the
nanoe™ outlet (see
P.21 for instructions).
A humming noise is heard from the
nanoe™ outlet.