26
※
In the case of Wash+Dry
※
If you don’t need to dry the clothes, do not press
the "Dry Mode" button.
■Preparation
①
Prepare the laundry for washing (P.20)
●Clothing classification ●Pretreatment
②
Turn on the faucet.
③
Put the laundry into the tub and close the
door.
Wash+Dry
Wash
●Capacity: 10
k
g
or below
●Normal: 18
k
g
or below
● Warm water: 6
k
g
or below
(Suggest)
1
2
3
Put in the clothes, close the door and press
the power button.
On
Off
Press the
Dry
Mode
button (Wash+Dry)
If you want to choose 30 °C for warm water
washing,
(Suitable for low water temperature in
winter)
Press
Stain
until the "30
°
C" light is on.
4
Press the
Start
Pause
button.
● Do not put the clothes over the top of the inlet
when washing, otherwise it is easy to cause
damage to the product.
The "Normal" light is on.
■ Please refer to P.19 to select an appropriate drying
schedule.
■ After the drying process is over, perform the
"
Fluffy
"
program (for about 2 hours, and the
"
Fluffy
"
light will
flash).
※
Because the drying process is over, please take out
the clothes as soon as possible.
● To cancel
"
Fluffy
"
after drying the clothes (P.44)
For washing
ordinary clothes
※
If you put in too
much laundry, it may
not dry or the drying
time will be longer.
4
2
3
1
5
Put the detergent that meets the amount of
water displayed into the detergent case (P.23)
The program ends when the buzzer sounds.
In the no-water state, the tub
rotates for about 15 seconds to
detect the amount of laundry.
The amount of water will be
displayed for about 20 seconds.
(the water level will also be
displayed)
Water injection starts after the
remaining time appears.
Remaining time
(about) minutes
Instruction
• If nanoe
TM
X "nanoe Tub Hygiene" is elected, it will
automatically enter nanoe Tub Hygiene after taking
out the clothes and closing the door. (P.25)
●
Select "Normal Dry", "Extra Dry", "Gentle Dry" or
"Timed Dry" to light it up.
■ If "Wash+Dry" or "Dry" is selected,
the display when there are too many
clothes (the capacity is exceeded).
The value displayed will flash when the amount
of water is displayed.
Normal/Stai
● Normal
NA-V180HDH(s)_160HDH(s)-English.indb 26
2022/6/10 下午 10:27:15
