background image

- 5 -

3. FEATURES AND TECHNICAL INFORMATION 

NA-F70T1 / NA-F70T1P

Product special features

• Pre-wash weight sensor
• Dial indicating detergent level after sensing wash level
• Pre-set timer
• Fabric softener dispenser
• Detergent dispenser
• Automatic power-off when finish
• Dial indicating unusual sign (LED will blink)
• Overflow sensing device
• Dial indicating time remaining

 High             Medium             Low  

 Low                 Pulse Number                 High

Weight Sensor

The weight is sensed by the moving force of the Pulsator, 
which changes a capacitor pole and releases a signal wave. 
The wave is changed into a pulse number from which the 
clothes weight is sensed. Prior to weight sensing for Normal 
and Strong program, the machine runs without water by 
spinning the Pulsator to left and right for 4.2 seconds 
(ON 0.3 second- OFF 0.4 second).
The motor stops (OFF), a water system counts the pulse
number, then calculates the accumulated pulse numbers for
drawing water into the tub over a defined level. The dial will
indicate High wash level.

Program

Time

Normal

Speedy

Delicate

Tub Dry

Soak 1 hour

Soad 3 hour

Soak 8 hour

Approx. 40 - 59 min

Approx. 21 - 37 min

Approx. 24 - 29 min

Approx. 36 min

Approx. 100 - 119 min

Approx. 219 - 238 min

Approx. 511 - 530 min

NA-F70H1 / NA-F821H

Product special features

• Pre-wash weight sensor
• Dial indicating detergent level after sensing wash level
• Pre-set timer
• Fabric softener dispenser
• Detergent dispenser
• Automatic power-off when finish
• Dial indicating unusual sign (LED will blink)
• Overflow sensing device
• Dial indicating time remaining

Program

Time

Normal

Mini

New Speedy

Blanket

Delicate

Tub Hygiene

Soak 1 hour

Soad 3 hour

Soak 8 hour

Approx. 46 - 60 min

Approx. 15 min

Approx. 37 - 53 min

Approx. 47 - 55 min

Approx. 23 min

Approx. 150 min

Approx. 61 min

Approx. 179 min

Approx. 471 min

NA-F70T1 / F7OT1P / F70H1 / F821H

Summary of Contents for NA-F70H1






























Reviews: