4
Operation Panel
ECONAVI lamp (P. 8)
(NA-F135X1)
• Operation panel
of the NA-F135X1
Power Off/On
Air Dry (P. 9)
Start/Pause
Program selection (P. 5)
Child Lock lamp (P. 10)
Change process
settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P. 9)
Flashing (in progress)
Lighted
●
After starting operation, you
can change settings only during
wash process by pressing
“Start/Pause”.
Preset
Set the time to
fi
nish washing (in
hours). ( lights.)
e.g.) 8 hours later
●
Setting range: 2 - 24 hours
later, in one-hour increments.
(3 - 24 hours later for the Power
wash + Soak program)
●
Not available for the following
programs:
Delicate, Fragrance, Blanket,
Tub Hygiene, Air Dry
NOTE
●
In case of a power failure
during operation, operation will
resume from the point where it
was stopped when the power
is recovered (Auto Restart).
●
The power turns off
automatically if you do not
press “Start/Pause” within
10 minutes after power-on.
Change water
level
During the wash
process, press “Water
Level” to change the
water level.
●
Some water levels
cannot be selected
depending on the
program.
●
When the remaining
time is displayed,
press “Water Level”
to check the water
level.
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra
Low
1
Model
Detergent *
Water
amount (L)
93 86 81 73 66 58 52 46 38 33
NA-
F135X1
NA-
F135A1
86 81 73 66 58 54 52 46 38 33
NA-
F115A1
*
: 1 scoop of detergent
●
Each water level, except “Extra Low”, has
three water amount options that can be
switched while the level is lit by pressing
“Water Level”. (Example: For NA-F135X1,
“High” has 93 L, 86 L and 81 L options.)
Water level/remaining
time
After starting operation, indicates
the water level according to the
amount of laundry.
After approx. 5 seconds, indicates
the approximate remaining time
(min).
OM_NA-F135X1(W9901-9CR40)_EN(UAE, Kuwait, Oman, Qatar).indd 4
OM_NA-F135X1(W9901-9CR40)_EN(UAE, Kuwait, Oman, Qatar).indd 4
8/26/2559 BE 9:57 AM
8/26/2559 BE 9:57 AM
