9
Installation area
Before installing the machine, the location characterized
as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Keep far away from fuel sources such as coal or gas
Unpacking the washing machine
1. Remove the carton box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the secure tape from power cord and drain hose.
4. Take out inlet hose and other accessories from inner tub.
• Stability is important to prevent the product
from moving!
• Make sure that the product does not stand on
the power cord.
Warning!
• Packing material(e.g. poly bag, films, styrofoam) can be dangerous for
children. Ensure keep children away from them.
• There is a risk of suffocation!
Warning!
INSTALLATION
w
w
W
20 mm
the unit. It will cause damage to the machine.
Do not operate the washing machine with the base packing still intact with
Note!
Base Cover Installation
Step 1. Insert base cover into base slot
as below picture;
Step 2. Push base cover into proper
position;
Step 3. Press base in below direction
to snap four buckles into base;
Step 4. Use screw to fix base cover.
Installation of base cover:
Step 1
Step 2
Step 3
Step 4
