Maintenance - 33
Maintenance
Cleaning the water-supply
filter
Clean the filter if water is not supplied
properly.
Turn the tap off.
1.
Switch on the appliance.
2.
Select the Cotton programme, and
3.
then press the Start button. Drainage
begins when the appliance is started.
After 2 minutes, switch off the
4.
appliance. Water has been drained
out of the water-supply hose
.
Disconnect the water-supply hose
5.
from the appliance.
Clean the filter, which is on the rear
6.
of the appliance.
Use a small brush, for example,
a toothbrush.
If the unit is supplied with the hose
7.
fitted with a water-supply valve, turn
off the tap supplying the appliance,
disconnect the hose from the tap,
and then clean the filter on hose in
the same way.
Pull your finger on the tab near the
3.
front of the softener cover then pull
it up to remove it from the detergent
drawer.
Wash out the old detergent with
4.
water.
Use a cloth to wipe the water from the
appliance.
Replace the softener cover.
5.
Reinsert the detergent drawer while
6.
pressing down on the tab as shown
in the figure below.
Tab
NA-148VB5_English_UK.indb 33
2013-12-13 17:28:34
