12 - Read Before Using
Before You Start Washing
Before use, check
For the appliance’s initial operation or
after a prolonged period of non-operation,
perform the following procedures:
Secure the water-supply hose.
1.
Open the tap.
2.
Connect the power.
3.
Make sure that the water-drain hose
4.
is positioned towards a drain.
For more details, see page 39.
Before initial use
The default setting is the 40 ºC
Bawełna
(Cotton) programme. For the appliance’s
initial operation, operate it WITHOUT any
detergent or clothing to rinse out residue or
moisture.
Note
There may be drops of water or
condensation in the appliance due
to the factory inspection prior to
shipment. This is not a malfunction.
Preparing the laundry
Sorting clothing
Read clothing washing labels to help
-
you sort them into different loads.
Sort the laundry by colour, by type of
-
fabric, and by how soiled it is. Doing
so will help you choose the correct
programme and temperature for each
wash.
Clothes that are not colour fast should
-
be washed separately. Wash denim
separately.
You should put bras with metal wires,
-
tights, lace clothing and small items of
clothing into a laundry net to prevent
them or the appliance from getting
damaged.
Caution
Do NOT wash water-repellent
clothing.
There is a possibility of excessive
vibration or failure during the spin-
drying cycle that may result in an
injury, damage to the appliance or a
water leak.
Treating stains
Apply stain remover to stained portions.
For dirt and solid stains, wash lightly by
hand first.
Checking clothing
Check that pockets on clothing do not
-
contain any objects that may damage
the clothes or the appliance.
To avoid clothes being damaged, check
-
and tie up loose strings, close zips, turn
clothing with raised fabrics and zips
inside out.
Remove any hair, animal fur, sand,
-
and other materials with a brush before
washing.
Note
Do not wash clothes that are heavily
stained with large quantities of
vegetable oil or cosmetic oil (aroma oil,
etc.) Failure to observe this may result
in the door seal swelling, causing
the water to overflow and leading to
malfunctions.
NA-107VC5_English_Polish.indb 12
2016-6-1 15:00:41
