EN8
Blender & Dry
mill
Even turn to "1"
position, the
appliance
does not start
blending.
●
●
The blender jug
/
mill container is not set properly.
●●●➝
Make sure to align the marks on blender jug
/ mill container and motor housing, then twist
it firmly until you hear a "click" sound.
●
●
The mill container base is not assembled tightly. (MX-EX1021 only)
●●●➝
Assemble it tightly. (P. EN6)
●
●
The protection device of overload or overheating is activated.
●●●➝
Refer to “Overload and Overheating Protection” for inspection. (P. EN7)
●
●
The power plug is disconnected.
●●●➝
Insert the power plug into outlet firmly.
Rotation stops
abruptly.
●
●
The protection device of overload or overheating is activated.
●●●➝
Refer to “Overload and Overheating Protection” for inspection. (P. EN7)
There is abnormal
noise or vibration
increases.
●
●
Too much ingredients.
●●●➝
Reduce ingredient amount.
●
●
The mill container base is not assembled tightly.
(MX-EX1021 only)
●●●➝
Assemble it tightly. (P. EN6)
The ingredient is
leaking.
(MX-EX1021 only)
●
●
The mill container base is not assembled tightly.
●●●➝
Assemble it tightly. (P. EN6)
●
●
The mill gasket is not attached or attached loosely.
●●●➝
Attach it properly.
●
●
Foreign matters are attached to the mill gasket.
●●●➝
Remove them.
●
●
The mill gasket is damaged.
●●●➝
Contact Panasonic Service Center to replace it.
Blender
The blade is idling.
●
●
The liquid amount is not enough.
●●●➝
Add more liquid.
●
●
Too much ice cubes.
(e.g. juice with a lot of ice)
●●●➝
①
Remove blender jug after rotation stop completely.
②
Shake the blender jug gently.
When the blender is used
When the dry mill is used
(MX-EX1021 only)
Power supply
220
-
240 V 50
-
60 Hz
Power consumption
230
-
260
W
Rated time
Continuous operation
(Repeat the cycle
of 3 minutes ON and then 1 minute OFF)
Continuous operation
(Repeat the cycle
of 1 minute ON and then 2 minutes OFF)
Working capacity
(approximately)
1000
mL
50
g
Dimensions
(approximately)
W
173
mm
148
mm
D
161
mm
161
mm
H
353
mm
257
mm
Mass. (approximately)
1.5
kg
1.3
kg
Check following points before calling or arranging for repair.
Problem
Cause and Action
Troubleshooting
Specifications
