Panasonic MS Series, Operating Instructions Manual

Page: 24 / 37

23
.
AudioLink Application Guide
AudioLink is a directional application for audio transmission.
It supports the setting of two working modes. The first mode
is to push audio from the TV to the audio peripheral. The
second mode is to push audio to the TV from a Bluetooth
playback device (such as a mobile phone). In the initial state,
the default mode is mode one. The following describes how
to use the two working modes.
Mode 1: The TV sends audio to the audio peripherals
Step1
:
Press the AudioLink key on the remote Or click
on the homepage APPS to Launch AudioLink APP
,
as shown below Figure1
：
Figure1
Step2
：
Click [TV to Bluetooth Speaker]
,
if the TV is already
in the current mode, it will jump to the search Bluetooth
device interface. At this time, you can search for nearby
Bluetooth audio peripherals, and click Connect,
as shown below Figure2
：
If TV is in Mode 2 above
,
at this time, click [TV to Bluetooth
Speaker] to pop up a prompt dialog,Click Yes again to jump
to the above Figure2, as shown below Figure3
：
Figure2
Figure3
3. Pay attention to the power supply of the device when
you are using a mobile hard disk or a digital camera.
If the power supply is not su
ff icient or not stable, you
may encounter problems during operating or can not
operate at all. In this case, please restart the device,
or unplug the device and plug it again, and ensure that
its power supply is normal.
4. The system supports standard USB1.1 and USB2.0
devices, such as standard U-disks, MP3 players,
mobile hard disks, etc..
5. For obtaining better audio and video quality, It is
suggested to use the external device which accords
with USB2.0 \ USB3.0 standard.
6. When playing the video with high compression ratio,
these phenomenons, such as picture standstill and
menu long time response, are normal.
7. For some USB device with power supply, such as large
size hard disk, MP4, etc., Suggests using it with power
to avoid electric power shortage. The parameters of
file, such as the pixel of picture, code rate of audio and
video file, sampling rate of audio file, exceed the limit
of the system.