background image

 

8

LIFETIME WARRANTY INFORMATION 

American Fibertek, Inc warrants that at the time of delivery the products delivered will be 
free of defects in materials and workmanship. Defective products will be repaired or 
replaced at the exclusive option of American Fibertek. A Return Material Authorization 
(RMA) number is required to send the products back in case of return. All returns must 
be shipped prepaid. This warranty is void if the products have been tampered with. This 
warranty shall be construed in accordance with New Jersey law and the courts of New 
Jersey shall have exclusive jurisdiction over this contract. 

EXCEPT FOR THE 

FOREGOING WARRANTY, THERE IS NO WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, EXPRESSED OR 
IMPLIED, WHICH EXTENDS BEYOND THE WARRANTY SET FORTH IN THIS 
AGREEMENT.

 In any event, American Fibertek will not be responsible or liable for 

contingent, consequential, or incidental damages. No agreement or understanding, 
expressed or implied, except as set forth in this warranty, will be binding upon American 
Fibertek unless in writing, signed by a duly authorized officer of American Fibertek. 

 

  

SERVICE INFORMATION 

There are no user serviceable parts inside the unit. 
In the event that service is required to this unit, please direct all inquiries to: 
 
American Fibertek, Inc. 

Phone: (877) 234-7200 

120 Belmont Drive 

Phone: (732) 302-0660 

Somerset, NJ  08873 

FAX (732) 302-0667 

E-mail: 

[email protected]

 

Summary of Contents for MRM-1485









Reviews: