English
1
Make sure that the appliance is disconnected from the power outlet and the
switch knob is in the "0" position.
2
Press the release button to automatically release the upper part, gently lift it
backward and fix it in the head-up position.
●
Remove the stirring container and clean it.
●
Put the ingredients to be blended into the stirring container.
3
Set the stirring lid to the upper part.
●
Set the stirring lid to the upper part in
the direction of the arrow and make
the feed port is placed in the same
direction as the switch knob to ensure
that it can be installed firmly.
The interface
between the
upper part and
the base
Feed port
4
Attach the stirring container with ingredients to the fixing holder.
●
Hold the stirring container handle with both hands and rotate it in the direction of
the arrow, and rotate it to the left until it stops completely and is installed in place.
5
Attach the kneading hook, stirring
blade or whisk to the adapter as
necessary, aligning the recessed part
of the kneading hook, stirring blade or
whisk with the protruding part of the
shaft pin.
①
Push up as far as possible in the
direction of the arrow.
②
Rotate counterclockwise in the direction
of the arrow to install it in place.
●
After installation, gently pull down
to make sure the accessories are in
place, otherwise, it may fall off during
operation.
②
①
6
Press the release button and press the upper part directly by hand (in the
direction) until a "click" sound is heard, and the installation is complete.
Preparations
Assembling
Assembling and
Desassembling
EN7
CM300-中近东.indb 7
CM300-中近东.indb 7
2021-09-29 13:18:46
2021-09-29 13:18:46
