11
INCUBATOR COMPONENTS
10. Timer mode select key (TIMER MODE):
This key is to switch a normal mode and a timer mode C.
Normal mode: The operation is finished when a set time of operation timer is expired.
Timer mode C: The operation continues with a set temperature even when a set time of operation timer is
expired.
Refer to page 15.
11. Timer mode C lamp (MODE C):
This lamp lights when a timer mode C is active.
12. Run/Stop key (RUN/STOP):
In a setting mode, press this key to start operation after setting. During
operation, press this key to finish operation (Refer to page14
～
17).
Note:
Except for a setting mode, an operation cannot be started by pressing this key.
13. Start lamp (START):
This lamp lights when the unit is operating.
Note:
This lamp lights when a delay timer is being set or when a continuous operation is being set after
an operation timer is finished.
14. Alarm lamp (ALARM):
This lamp lights when the unit is in warning condition.
15. Alarm buzzer stop key (BZ):
Press this key to silence the buzzer in the event that the alarm
operates and the buzzer sounds. Press it once again to reactive the buzzer.
Table 1: Display in the digital temperature indicator and digital timer indicator.
Set value
lamp
Digital temperature
Indicator (TEMP)
Digital timer indicator
(TIME)
During stop operation
OFF
Present temperature
―
During
operation
When a delay timer is
being set.
OFF Present
temperature
Remaining time of
delay timer
ON Set
temperature
Set time of
operation timer*
When an operation time is
being set.
OFF Present
temperature
Remaining time of
operation timer*
ON Set
temperature
Set time of
operation timer*
(In case of Timer mode C)
When a continuous operation is
being set after a operation timer
is finished.
OFF Present
temperature
“--:--“
ON Set
temperature
Set time of
operation timer*
*: When a continuous operation is being set in a operation timer, “--:--“ is displayed.
14
11
15 10 12
13